VutycFett ROTJ SE WIP

VutycFett

Concept
Special Edition WIP​

Thought I’d bring my WIP over here and just continue it. Been lagging abit on it, but all the reason to start working more on it. Hopefully you guys can help keep me accountable so it’s accurate! I’ll keep the list updated as I go so you guys can see my list of on order, arrived, working and done items.

DescriptionVendorStatus
Full Flight Suit/ soft partsArkadyon order
GlovesMikeMArrived
BootsImperial BootsDone
CapeObtained via eBay - US Army Half ShelterDone
GirthbeltAmazonOn order
Ammo BeltHandmadeHorrorshopOn Order
Wookie BraidsWoodmanOn Order
Jetpack - HarnessBigdaneOn Order
HelmetMinuteFettWorking
Armor- CollarWastedFettOn Order
Armor - ChestWastedFettOn Order
Armor- BackplateWastedFettOn Order
Armor - ShoulderWastedFettOn Order
Armor - CodWastedFettOn Order
Armor - KidneyWastedFettOn Order
Armor - Knee'sWastedFettOn Order
GauntletsWastedFettOn Order
Z-6 Jetpack7cs_propsWorking
Shin ToolsPatterson and bobafetthascollegedebtWorking
EE-3 BlasterMinuteFett
Armor- Chest LEDFettronics
Helmet- Range LEDJC27
Armor - Metal Studs (Collar/Back & Cod/Kidney)Etsy- QuestDesignCanadaArrived
Gauntlets - Metal DartsEtsy - QuestDesignCanadaArrived
Gauntlets - RocketEtsy - QuestDesignCanadaArrived
Gauntlets - Hose
Gauntlet - Metal Flamethrower NozzlesMachine Craft
Jetpack - Metal Beacon w/LEDEtsy - QuestDesignCanadaArrived
Jetpack - Metal StabilizerEtsy - QuestDesignCanadaArrived
Jetpack - Metal ExhaustEtsy - QuestDesignCanadaArrived
Anti-security blade metal piecesMachineCraftOn Order
DecalsDeLucks Design - Luckysy31
 

VutycFett

Concept
Cape​
I first started out on the cape by wanting it to be as authentic as possible so I went around and ordered an actual half shelter from a guy off of eBay. I just went around and drew a line for guidance to cut it out. In all honestly it wasn't correctly proportioned so I had to do some of my own sewing to it to size it correctly.
IMG_4758.JPGIMG_4759.JPG

Once I had it all cut out though I realized it was way to wide so had to cut it and resew it to match better. I also had to iron down the corners of the cape and sew around the outside except for the bottom where the damage is.
IMG_4764.JPG

Once I did I feel the finish the product came out pretty good, but always room for improvement for sure. I also added the "Boba Fett" hand written on it.
20200808_214500932_iOS.jpg20200808_214445571_iOS.jpg
 

Attachments

  • IMG_4761.JPG
    IMG_4761.JPG
    247.5 KB · Views: 1
  • IMG_4770.jpg
    IMG_4770.jpg
    3.1 MB · Views: 2
  • 20200808_214500932_iOS.jpg
    20200808_214500932_iOS.jpg
    2 MB · Views: 2

VutycFett

Concept
Boots​

For the boots I started out by gathering some specific paints, used old brushes and some paper towels. The colors I used for this were a black, grey, white, purple and straw. The white and purple were to help lighten and darken.
73F3CFA5-767A-4F1D-BF3F-2B96B60333C4.jpeg

Started our firstly by applying grey and white to the whole boot and black to the center.
47597388-D7F8-41A2-ADD9-11933FB7B8E1.jpeg8AD9D061-3ACB-46E3-A63D-FFB60D07C83E.jpeg

Once I finished that I just went around the edge of the boot and applied the black to give it that “dirty” look. I kept doing that until I got what I thought looked best to the reference photos I used.
E60DDC57-F2EB-4F23-B1BE-69F445539866.jpeg4F84599E-A1F7-494D-944B-CE83D0CB74E0.jpeg701BBF75-23FD-40E0-BAA3-9BB57F84C3DF.jpeg

Afterwards I used some of the grey and a lot of the straw color to dirty up the white of the shoes.
5AAA6C0A-E641-4031-952F-130CCE843E21.jpeg710841FE-D301-4B38-9288-6BE17CD098A1.jpeg86294094-00D6-4479-A727-249D6BE45952.jpeg

After the weathering process I give some wheathering with some sanding tools. May have gone a little overboard but I do like the look...
9578C2F2-8E66-4012-9CAF-81FAE0748C7A.jpeg

Here is the finished product!

A7A4E92D-EA71-41DA-8A14-5BA3277589C5.jpeg9BC722FC-1DD8-4C78-B659-5A6ECE157702.jpeg2D147B2C-BABF-4A94-ACAD-6542D63123BC.jpegA802A607-F77F-4DAB-9904-4503146A0565.jpeg
 

Attachments

  • 3C0EE8C2-52F5-4671-B527-2571F4E0620B.jpeg
    3C0EE8C2-52F5-4671-B527-2571F4E0620B.jpeg
    2 MB · Views: 3
Top