Non shrink resin epoxy question

viewoptic

Supertrooper
I am looking for advice on which brand of non shrink resin fiberglass epoxy to use for installing 80gsm fiberglass cloth into helmet. Not sure if it matters much as the cloth will be more of glued in from one side vs. saturated in the resin epoxy. Any info is appreciated.

IMG_5923.jpg
 
if your helmet is already fiberglassed I don’t recommend adding cloth, what your essentially going to do is end up adding at least 10 more oz of weight onto a helmet and make it thicker.

Also, you will 100% need to saturate the cloth in order to remove air pockets.

In my opinion it’s not worth doing, you risk doing a not so good job, air pockets, adherence issues, drips/pooling epoxy.
 
Back
Top